JMC ROKKER 1000XXR A2B 2/4-CH AMPLIFIER KIT 2023 ½ - 2025 HARLEY ROADGLIDE / STREETGLIDE / CVO

Peak Power Output: 2040w Peak Power – 510w x 4CH – 2-ohm load at 14.4vdc
RMS Output Power: 920w RMS - 230w x 4CH - 2-ohm
Amplifier Class: New high-efficiency Class-D IC circuitry, (no cooling fans needed) properly shielded against FM/AM radio interference
Manually Adjustable: All controls are easily adjustable should any changes need to be made during the installation
Marine Grade Protection: PCB is conformal coated for complete protection against water damage in the motorcycle or powersports environment
Power Supply: 12v Digital Switching – Very Low Amperage Draw Compared to Other Brands in this Power Range
Rear Speaker Ready: This amp kit automatically connects into the rear speaker output wires already built into the stock Harley wire harness, to allow direct plug in under the seat for rear mounted saddlebag-lid or trunk-pod speakers, using the applicable rear speaker wiring harness
A2B Integrated Converter: Special Integrated A2B ROKKER 1000XXR Amplifier replaces the stock Harley amplifier completely during the installation (NO Amplifier Piggy-Backs)
Speaker Compatibility: Compatible with any 2, 3 or 4-ohm speakers, including stock Harley
Mounting Options: Mounts into the in-fairing cradle with JMC brackets and mounting hardware
External Dimensions: 7 ¼” x 4 ¾” x 1 ¾” (in.)
Comparision Rating: ROKKER speaker and amplifier kits provide lower distortion levels, better bass response and superior highway performance, compared to stock Harley, Fosgate or Hertz

Description

This new JMC ROKKER® 1000XXR stage6 fairing/rear speaker amplifier kit has been designed specifically for use on the 2023 ½ - 2025 Harley RoadGlide, StreetGlide or CVO.

Kit includes the integrated A2B converter and is 100% plug-n-play into the electrical system, providing 2/4-channels of amplification at 230w RMS power per-channel x4 (920w RMS total) into a 2-ohm speaker load. (No more Amp Piggy-Backs)

New high-efficiency Class-D IC circuitry, (no cooling fans needed) properly shielded against FM/AM radio interference.

PCB is conformal coated for complete protection against water damage in the motorcycle or powersports riding environment.

This ROKKER amplifier uses advanced digital switching power supply technology to dramatically reduce the 12v current demands on the motorcycle electrical system, compared to other brand amplifiers in this power range.

ROKKER amplifier mounts into the in-fairing cradle with included JMC brackets and mounting hardware.

This amp kit automatically connects into the rear speaker output wires already built into the stock Harley wire harness, to allow direct plug in under the seat for rear mounted saddlebag-lid or trunk-pod speakers, using the applicable rear speaker wiring harness.

This new ROKKER series amplifier comes out of the box already dialed in for this specific speaker configuration, to provide lower distortion levels, better bass response and superior highway performance, compared to stock Harley, Fosgate or Hertz.

Also included are our custom made heavy-gauge power and ground wires used for the fused battery & frame connections, along with all necessary mounting hardware & complete installation/operation instructions.

Amplifier itself measures 7 ¼” x 4 ¾“ x 1 ¾” (in.)