JMC ROKKER STAGE6 AUDIO KIT W/800W RMS 4-CH AMP & 6.71” FAIRING/REAR SPKRS 2016-2023 HARLEY ROADGLIDE ULTRA/LTD

Amplifier Output Power: 800w RMS total (200w x 4) into 2-ohms at 14.4vdc
Amplifier Class: Class D properly shielded against FM interference
DSP Programmable: Amplifier comes out of the box already dialed-in for this specific Ultra speaker configuration
Manually Adjustable: 12v Digital Switching, Low Amperage Draw Compared to Other Brands in this Power Range
Power Supply: 8 ¼” x 5 ¼” x 1 ¾” (in.)
Mounting Options: Amplifier mounts to the Lazer-cut stainless steel 2-piece bracket system, to provide solid and secure mounting inside the fairing
Radio Compatibility: Amplifier is tuned for connection to the Harley GTS, 6.5GT, or 4.3 Std radio with Stock Harley Flash and is also fully compatible with the Sound Stream HDHU.14si, Precision Power HDHU.14si, & Fosgate PMX-HD14
Speaker Size: 6.71” (in.) Diameter
Cone Construction: Black Glass-Fiber
Tweeter: PEI Dome High-Output
Frequency Response: 30-23kHz
Sensitivity: 90 db
Magnet Material: Lightweight Neodymium
Impedance: 2 Ohms
Maximum Power: 300 Watts
RMS Power: 200 Watts
Mounting Depth: 2 7/8” (in.)
Weather Resistant: Yes
OEM Size Match: Yes
Comparision Rating: ROKKER speakers and amplifiers provide the most significant increase in volume and overall fidelity compared to stock Harley and/or Fosgate

Description

The new ROKKER 4-ch 800w amplifier kit has been designed specifically for the 2016-2023 Harley® RoadGlide Ultra, Ultra Ltd fairing with the stock Harley 4.3 Std, 6.5GT or GTS touch-screen radio, and is tuned for the stock Harley flash, NO SPECIAL FLASH needed.

This new amplifier kit is also fully compatible with the Sound Stream HDHU.14si, Precision Power HDHU.14si, & Fosgate PMX-HD14

DSP Programmable, amplifier comes out of the box already dialed-in for this specific Ultra speaker configuration.

This is a full range class D amplifier and is spec’d at 200watts RMS per channel X4 channels, (800w total) driven continuous into a 2- or 4-ohm speaker load.

Amplifier mounts to the Lazer-cut stainless steel 2-piece bracket system, to provide solid and secure mounting inside the fairing.

Custom made plug-n-play JMC red-band wiring harnesses are included with this complete amplifier kit, top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation instructions.

Amplifier itself measures 8 ¼” x 5 ¼“ x 1 ¾”.

ROKKER XXR 6.71” speakers are spec'd at 2 ohms impedance and 300 watts maximum input (200w RMS - 91db sensitivity), these speakers provide maximum on-highway performance.

Speaker drivers feature lightweight waterproof woven-fiber cones with super-rigid metal basket and a high-density lite-weight Neodymium magnet structure with integral high-output grill-mounted PEI tweeters.

Mounting hole pattern and spade electrical connections are exactly the same as the factory specification.

Harley Radio Programming Note: If your Harley infotainment radio was previously flashed to a different configuration from stock, (i.e., BoomI or Boom II) instruct your dealer to re-flash the radio back to “” 4-Speakers, Upper-Fairing, Rear-Pods, No-Amp “” using the Harley or other brand digital technician, prior to the installation of this complete kit.